I believe Victoria British sells just the diaphragm.
Scott Suhring
Elizabethtown, PA
'70 TR6
'59 TR3
-----Original Message-----
From: owner-triumphs@autox.team.net
[mailto:owner-triumphs@autox.team.net]On Behalf Of Mickylong@aol.com
Sent: Sunday, February 23, 2003 5:00 PM
To: triumphs@autox.team.net
Subject: Carb bypass valve diaphragm
OK, so I'm in the middle of a carb rebuild on my "72 TR 6 and I find that
the
bypass valve diaphragm on the first carb seems to be marginal (still moves
but seems to be a bit brittle). The rebuild kit I purchased locally doesn't
have a diaphragm included. My question is, Do any of the rebuild kits
offered by the big three include this? Or, How critical a component is it?
If I just carefully reinstall the old diaphragm along with new gaskets will
I
notice a major difference in performance?
My reason for doing the rebuild was to try to cure a rough idle and
inability
to get mixture settings correct. Could this be part of my problem?
Micky Long, Atlanta
72 TR 6
/// triumphs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|