On my 63 TR4 the tonneau snaps on the doors are screwed on.
Cheers
Pete Fullam
CT19207L
ZoboHerald@aol.com wrote:
> In a message dated Fri, 30 Aug 2002 12:09:34 AM Eastern Standard Time,
>Egbman1@aol.com writes:
>
> >Wise Ones,
> >I'm looking for a tonneau cover for my TR4. I've looked at the big 3 and LBC
> >Co. LBC's is made in UK, don't know about the others. Any recommendations?
>
> Robbins are very good (so long as you don't mind doing all the fastener
>installation yourself, with no written or other help from the manufacturer :-)
>). If they're still around, AMCO tonneaus were (are?) fine as well.
>
> > In addition, I'm missing one of the snaps on the
> >left-hand side of the dash next to the windscreen acorn nut. Are these
> >available?
>
> Any halfway-decent hardware store will have these snaps, usually in "bulk"
>quantities (like, 10 or so in a blister pack or bag) and often will have the
>installation tools as well. All of the above can often be found for well under
>$10, which should give you plenty of extra snaps.
>
> > I also need to install the snaps on
> >the door tops (PO didn't like them) do they screw in or are they riveted on?
>
> They're riveted to the doors on later cars, but I'm not sure about the TR4.
>Someone will know for sure.
>
> --Andy Mace
/// triumphs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|