My son and I just installed a new wiring harness in the TR6 (1976). The job
seemed to go pretty smoothly. Dan's book was invaluable. I would recommend it
to anyone about to do electrical work on the TR6.
When all was said and done - Started the car and everything seems to be fine
except for the horn. If we put power to the relay, horn blows! Press the
horn button - nothing!
Wires coming out of the steering column are:
Blue/White Blue/Red
Purple/Black
Brown/Red
BROWN - this wire is not connected to anything. Possibly this is the culprit
- but - what does it attach to?
Any suggestions would be appreciated.
Drove the car yesterday - ran fine - BUT (don't you just hate that) - brake
fluid on the mat inside the car - pulled the boot on the pedal and fluid came
out of it. Any ideas as to where this may be coming from? My feeling is that
the seals are gone in the master cylinder. Any ideas or suggestions?
The list is great - thanks to everyone.
Gary Nicklaus
1976 TR6
1962 TR3B
1959 TR3A
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|