Hi Randall,
I took the plates off the car and dry fit them to the side pieces. The
wires were too far and I made a minor adjustment using a spade screwdriver
and a BFH (standard adjustment tools, right? :-) )
A little practice and the dzus fasteners now go on with a little pressure
and they are still tight due to tension. :-). Yeehaa.
On to the next task, adjusting & trimming the bottom seal.
Thanks, again...
David A. Templeton
'59 TR3a
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|