>I bought a relatively cheap engine stand at Checker and bolted the engine
>(sans trans of course) to the rear engine plate at four evenly (as
possible)
>spaced locations with some grade 5 bolts I picked up at the local hardware
>store. It has been on the stand for more years than I wish to admit with no
>problems. I did support the front of the engine with a 2x4 towards the
front.
My buddy Bob bolted his engine stand to his workbench, which is of course
bolted to the wall.
Phil Ethier Saint Paul Minnesota USA
1970 Lotus Europa, 1992 Saturn SL2, 1986 Suburban, 1962 Triumph TR4 CT2846L
LOON, MAC pethier@isd.net http://www.mnautox.com/
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|