Non TR specific but for engines in general.
A cylinder head is pretty ridged so removing one bolt then re installing
usually isn't a problem. Just don't remove the bolt then go looking for the
bracket, the longer the head sits with a missing bolt the greater chances of
the head lifting up and breaking the seal.
Loosening bolts on something less ridged like a two bolt water outlet could
cause a leak. But something that small is easy to remove and replace the
gasket if a bolt must come off.
Harold
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
|