Subject: speedometers etc.
>
> > According to Bentley the unit is supposed to come out with the
loosing of
> one bolt, but my transmission hasn't read the Manuel and refuses to give
up
> the pinion gear.
> Has any one tried to get the pinion gear out? Any success?
> Thanks for your indulgence.
> Bob Rochlin
> 72' TR 6
>
Bob,
I do following to remove speedometer bearing with gear:
Remove the bolt.
Screw the speedometer cable on.
Use a very large screwdriver with blade under the lip of the speedometer
cable nut to pry out the bearing with gear.
There is a photo of the operation at this website:
http://www.nextek.net/BuckeyeTriumphs/ Click technical button, then click
TR250 - TR6 gearbox disassembly.
You should consider replacing the oil seal inside the bearing as well as the
O ring on the outside.
Good luck
Nelson Riedel
Granville, OH
76 TR6 (assembling after new paint)
68 TR250 (next project - new paint)
70 TR6 (all the parts in a pile ready to assemble)
///
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
///
|