Re: '76 Flexible clutch tubing

[Skip Osmundsen <gosmund@mail.jax.bellsouth.net>]

Eric, you said in your original post,
 < ( ....  there are no screw-on fittings or other type, the "plastic"
tube is simply pushed on to the metal pipe and overlaps by approximately
1 inch.)>

The flexible line does in fact connect into the system with fittings
on each end.  It sounds (from your wording) that yours just slips onto
the metal tubing, (maybe modified by the po), if that's the case, you'll
need to fit new metal lines with the proper fittings.

Skip Osmundsen
'76 TR6
'60 TR3
lines that run to the M/C and the