Re: Water Pump

[John Duhart <duhart@symbol.com>]

Hey Paul,

 Yes I just did this last week!  on the end of the stud with no nuts place two 
nuts together.  Tighten them against eachother, then hold a wrench on the 
bottom one and unscrew the rusted nut on the other side.  If this isn't clear 
please ask any questions you have.

Later,
JHD IV
>
>
>     I'm in the middle of replacing the waterpump but the studs that hold
>     the bolts to the housing came out with the nuts. The previous owner
>     must have "lock tite" the nuts to the studs. Any suggestions on
>     removing them or should I just find new studs.
>
>     paul_barlow@bctransit.com 
>
>     Paul Barlow
>     TR250 CD 5470
>
>