Re: FW: 76 Spitfire - Wheel Bearings

[tambrose@tir.com (Tom Ambrose)]

Speaking of rear axles: I've noticed while spinning rear wheels, with my
Spit on jackstands, that the wheels/axles don't run true. That is,
regardless of which wheels I use, one rear has a total of 1/4 inch deviation
and the other has 3/16.

I'm not sure if I've expressed this correctly, but I guess my real question
is: What sort of run-out (if this the term) is tolerable?

Thanks,

Tom
4 Spits