Re: Hammer for wire wheels

[JIMSTR6@aol.com]

GARY
WHEN I HAD A TRIUMPH WITH WIRE WHEELS I MADE MY OWN HAMMER FOR NEXT TO
NOTHING AND IT WORKED GREAT.  I WENT DOWN TO THE HARDWARE STORE AND BOUGHT 1,
1" COPPER T, 2, I" COPPER PIPE PLUGS  AND A SHORT LENGTH OF 1" COPPER PIPE.
 I THEN SILVER SOLDERED THE CAPS ON THE END OF  THE TEE AND RAN A SHORT
LENGTH  FROM THE CENTER. THEN FILL THE HEAD WITH LEAD.  MAKE A WOOD HANDLE
AND FIT INTO THE STUB PIECE  AND YOUR DONE.

73 TR6