Steve,
Not really sure of the nomenclature here, But I did spend a decent
amount of time under my '72 this weekend replacing some rear suspension
bits. My stock system rides in between the frame rails, never really
dipping below their lowest "horizontal plane". If the rear frame breast
plate is what I think it is, then my exhaust rides on top of the lower
plate and in between the frame rails.
Sorry for the confusing response, and good luck......
Bill
'72 TR6
Date: Mon Jun 17, 1996 12:49 pm CDT
Source-Date: Mon, 17 Jun 96 10:29:51 PDT
From: ssutton
EMS: INTERNET / MCI ID: 376-5414
MBX: ssutton@ban.chinalake.navy.mil
TO: triumphs
EMS: INTERNET / MCI ID: 376-5414
MBX: triumphs@autox.team.net
BCC: * Bill Georgas / MCI ID: 541-9627
Subject: TR-6 exhaust routing
Source-Msg-Id: <vines.B2e5+vLNllA@ban.chinalake.navy.mil>
U-Sender: owner-triumphs@triumph.cs.utah.edu
Can anyone tell me if the rear exhaust pipes, on a stock dual pipe exhaust
system, pass between or below the rear frame breast plates? I took off
the DPO 'bodge' exhaust system several years ago when I started my
frame-off and am now replacing it with a stock system.
Thanks,
Steve Sutton
74 1/2 TR-6
RIdgecrest, CA
|