Guys,
I am running a Subaru master as well and I sourced it from Dale A. it
works VERY well with the 4 wheel disk set up I also sourced from Dale A.
When I did the Brake upgrade I also used the vented from rotors from
Dale and the entire combination works great. The only hiccup was that
when I installed everything the pedal was VERY low and it gave me no
confidence so I started tearing the Brake Pedal out again to bend it and
noticed a second hole lower down in the arm. Tried the lower hole and it
gave me ALL of the travel I needed. So those of you running the dual
master be aware of the second hole if you need a little more travel.
Best Regards,
Tim Ronak
Services Consultant
Akzo Nobel Coatings
23961 Via El Rocio
Mission Viejo, CA 92691
Bus: 949-305-5393
Fax: 425-955-6268
Cell: 949-289-3357
email: timothy.ronak@crna.akzonobel.com
Personal email: timronak@cox.net
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers
http://www.team.net/archive
|