Re: Rocker Arm Nut

[Carmods@aol.com]

On the  stock 260, is there supposed to be 2 nuts that hold down the rocker 
arms or  just 1


Chris,
The failure mode of the single rocker arm nut is wear of both the nut and  
stud threads  to a point that there is little prevailing torque. They wear  
from 
adjustment or removal. You can replace the nuts or add lock nuts. If  the 
pressed in studs were starting to work out, they would probably pop all  the 
way 
out by now. 
 
 John Logan