DJoh797014@aol.com wrote:
> My MK IA has the same booster as pictured on the
> Rootes Assembly line pictures in 'Making of a Tiger'.
> You can seen the 7 in booster and where it mounted.
> I have no problem with clearance and can easily
> reach the solenoid. Of course the mounting bolts
> have to be reached from inside the passenger footwell.
>
> Dave
Dave,
Took a look at the picture on p. 74 of "Tiger - The
making of a sports car", by Mike Taylor. Seems that they
are the 382.. series, rather than the 947.... by the
servo vacuum connection running through a bent tube to
the manifold. Mine has the earlier swivel banjo fitting,
which may contribute to the routing difficulties.
Anybody have that tube, fitting, and "P" clamp available?
I was able to put my hands on the solenoid. Getting a
wrench around the cable nuts, and a small boy under the
dash to hold the uncaged nuts is a fit no mater which
size booster you have, unless it's a RHD.
Thanks for your effort.
Steve
--
Steve Laifman < Find out what is most >
B9472289 < important in your life >
< and don't let it get away!>
_/_/_/_/_/_/_/
_/ _/_/_/ _/_/_/ _/
_/ _/ _/ _/ _/ _/ _/_/_/_/
_/ _/ _/ _/ _/ _/ _/
_/_/_/_/_/__/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
_/
_/_/_/
|