Re: Odds and Ends- Engine critique

[JEFF_CARTER@HP-Cupertino-om5.om.hp.com]

> Is there an easy (ier) way to get bolts out of the crossmember?

     Find a large magnet (an old speaker magnet?) and see if you can't track 
     the bolt back up to the hole.
     
> PS.Do the front end shims(the aluminum spacers)between the crossmember and the
> frame get installed large side facing front?
     
     
     As Gary mentioned, the large end goes to the rear.  If your local, I 
     have a rivet gun and the spare rivets. (San Jose)  Let me know.
     
     JCarter