Re: Stuck Pistons

[Anita Barrett <anitabrt@mindspring.com>]

At 07:20 PM 4/14/98 -0700, you wrote:
>CALLING ALL ENGINEERS - Metalurgy quesiton.
  Removing the head confirmed his worst fears.  Each cylinder
>was completely filled with water. 

Allan,
        Try PB Blaster, It comes in a yellow spray can.  It is much
better than WD-40 on rusted items.  It also stinks a bit.
I would try pulling the pan as well as the heads. Spray the
pistons from the bottom lips as well as the tops.
Good Luck
Jim Barrett Tiger II 351C and others