team-thicko
[Top] [All Lists]

Re: Spring troubles, follow-up

To: Lena <lflaherty65@yahoo.com>
Subject: Re: Spring troubles, follow-up
From: Gerard Chateauvieux <pixelsmith@gerardsgarage.com>
Date: Wed, 7 Feb 2001 13:13:34 -0800
A big thanks to everyone who sent responses to my spring question. I had
many replies to this one and most were like the one below... bottom line
- TOAST. I called a local spring shop and they weren't sure they could 
reproduce it because of the offset. I'll probably be going back to stock
springs for now and check the couple sources suggested by some for a 
replacement. 

Thanks, 

Gerard 

At 3:58 PM -0800 2/6/01, Lena wrote: 
> Gerard, 
> 
>  
> 
>My husband, the welding and metalurgy God, (OK demi-God), says that 
your spring is toast.  Spring steel cannot be welded without taking the 
temperment out of the steel, it basically loses its memory.  Even after 
welding, spring steel cannot be heat treated back to its original 
tolerance.  Sorry to be the bearer of bad news.   Booty Jo 
> 
>  
> 
>  Gerard Chateauvieux <pixelsmith@gerardsgarage.com> wrote:  
>  
> 
>After seeing Toby's photo of the driver's side of my Bugeye on 
Saturday, it 
>appeared that side of the car was pretty low to the ground, even more 
than 
>usual. Today's inspection revealed th spring has a crack in it on that 
>side. I have offset racing springs that are basically a single leaf. My

>question is, can the crack be welded and the spring be usable or is it 
>toast? The problem is, I don't think anyone makes these anymore. 
> 
>Thanks, 
> 

-- 
Please visit Four Points Travel -  
Discount Online International Travel Reservations 
http://www.gerardsgarage.com/fourpoints 
To make a reservation please call Toll Free 1-800-272-3253 


G G              Gerard Chateauvieux 
 E A        
  R R        pixelsmith@gerardsgarage.com 
   A A            
    R G          Pixelsmith  on  Duty 
     D E 
      S      http://www.gerardsgarage.com 

///
///  team-thicko@autox.team.net mailing list
///


<Prev in Thread] Current Thread [Next in Thread>
  • Re: Spring troubles, follow-up, Gerard Chateauvieux <=