--===============8669277538604795796==
boundary="--_com.lge.email_3258040847363590"
----_com.lge.email_3258040847363590
charset=utf-8
Content-Transfer-Encoding: 8bit
I'm a lot confused. If the 2 botyom bolts fell out , ok 2 less to remove.Â
The "strap" you mention ?  That confuses me.  What is the strap supposed
to attach to or do?  As long as the 4 trans mount bolts are out , shifter
removed and the speedometer cable detached , and the slave cylinder , the
transmission should slide out dumping a bunch of its lubricant on its way
out.  ( do drain it first!)  You did unbolt the braided ground cable that
attaches to the bottom of the right frame rail and the lower slave cylinder
bolt? Just asking...ChuckSent from my LG Mobile------ Original
message------From: Ryan via SpridgetsDate: Sun, Aug 16, 2020 4:37 PMTo:
Spridgets net;Cc: Subject:[Spridgets] Removing lump on 74 midgetPlanning on
pulling the lump together. I removed the 2 bolts in either side of the tunnel.
The two bolts that normally come in from the bottom of the car through the
bracket are not there neither is the bracket. However when I look through the
peep hole at the tale end Of the trans I can see a metal strap bolted to the
trans mounting bracket. Does this need to be removed? Itâ??s been 10 years
since I pulled the lump.
Ryan
Sent from my iPhone
------------------------
spridgets@autox.team.net
Archive: http://www.team.net/pipermail/spridgets http://autox.team.net/archive
----_com.lge.email_3258040847363590
charset=utf-8
Content-Transfer-Encoding: 8bit
<html><head>
</head>
<body>
<div style="font-size: 10pt;"><div dir="auto">I'm a lot confused. If
the 2 botyom bolts fell out , ok 2 less to remove. The "strap" you
mention ? That confuses me. What is the strap supposed
to attach to or do? </div><div dir="auto">As long as the 4 trans
mount bolts are out , shifter removed and the speedometer cable detached , and
the slave cylinder , the transmission should slide out dumping a bunch of its
lubricant on its way out. ( do drain it
first!) </div><div dir="auto">You did unbolt the braided ground
cable that attaches to the bottom of the right frame rail and the lower slave
cylinder bolt? Just asking...</div><div dir="auto">Chuck</div><div
dir="auto"><br></div><div><div dir="auto" style="font-size:9pt;"><i>Sent from
my LG Mobile</i></div></div></div><div style="font-size: 10pt;"><div
id="LGEmailHeader" dir="auto"><div dir="auto"><br></div><div dir="auto">------
Original message------</div><div dir="auto"><b>From: </b>Ryan via
Spridgets<spridgets@autox.team.net></spridgets@autox.team.net></div><div
dir="auto"><b>Date: </b>Sun, Aug 16, 2020 4:37 PM</div><div dir="auto"><b>To:
</b>Spridgets net;</div><div dir="auto"><b>Cc: </b></div><div
dir="auto"><b>Subject:</b>[Spridgets] Removing lump on 74 midget</div><div
dir="auto"><br></div></div><pre>Planning on pulling the lump together. I
removed the 2 bolts in either side of the tunnel. The two bolts that normally
come in from the bottom of the car through the bracket are not there neither is
the bracket. However when I look through the peep hole at the tale end Of the
trans I can see a metal strap bolted to the trans mounting bracket. Does this
need to be removed? Itâ??s been 10 years since I pulled the lump.
Ryan
Sent from my iPhone
------------------------
<a href="mailto:
spridgets@autox.team.net">
spridgets@autox.team.net</a>
Archive: <a
href="http://www.team.net/pipermail/spridgets";>http://www.team.net/pipermail/spridgets</a>
<a href="http://autox.team.net/archive";>http://autox.team.net/archive</a>
</pre></div>
</body></html>
----_com.lge.email_3258040847363590--
--===============8669277538604795796==
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
------------------------
spridgets@autox.team.net
Archive: http://www.team.net/pipermail/spridgets http://autox.team.net/archive
--===============8669277538604795796==--
|