Before I put the 5 speed in I used to have a ribcase with a roller bearing
throwout. Does anybody still make these?
If not, someone should.
I believe it is still in my tranny up in the attic. I should pull it out
and measure/photograph it.
-----Original Message-----
From: spridgets-bounces@autox.team.net
[mailto:spridgets-bounces@autox.team.net] On Behalf Of Gerard
Sent: Monday, November 28, 2011 4:37 PM
To: Spridget list
Subject: Re: [Spridgets] Throw-out bearing
I too have heard many complaints of premature failure on current
reproductions. I think the only one I would trust is the Borg and
Beck, but I'm not sure if they are sold separately from their clutch
kit. Just be aware if you go for a used one, that there are 3
different ones; 948, 1098 and 1275 are unique per application, both
with regard to carbon thickness and I believe pivot offset as well.
Gerard
_______________________________________________
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|