It is grounded to the side of the steering wheel which is metal. This is
grounded though the shaft of the steering column. There are a couple of
clips with teeth on the horn button that bite into the steering wheel and
retain the horn button. - Jim
-----Original Message-----
From: spridgets-bounces@autox.team.net
[mailto:spridgets-bounces@autox.team.net] On Behalf Of Heard Saxon
Sent: Monday, June 06, 2011 9:20 AM
To: spridgets@autox.team.net
Subject: Re: [Spridgets] Horn button question
I appreciate the help on this, but I understand the circuit from the brush
going to the horn. All of that works. What I don't see is how the spring
clip on the side of the horn button is supposed to make contact with a
ground. If it is supposed to make contact with the column or the nut
holding the wheel on, I don't see how this happens.
I believe I have an original wheel, but I'm not sure of that. Someone
mentioned there should be something cast into the wheel. The only thing
cast into my wheel I believe is the spline itself and I cannot see how the
clip is supposed to make contact with that.
_______________________________________________
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|