spridgets
[Top] [All Lists]

[Spridgets] Radiator Caps

Subject: [Spridgets] Radiator Caps
From: kevinv1275 at gmail.com (Kevin Valentine)
Date: Fri, 20 May 2011 09:19:34 -0400
References: <657109.92299.qm@web81202.mail.mud.yahoo.com>
Jeff,

Did you try a cap from a later (crossflow) radiator?

The neck is shorter on the crossflow rad and a crossflow cap is too  
short to seal a downflow rad.

Kevin V.



On May 20, 2011, at 9:09 AM, Jeff Kelly wrote:

> A question for anyone that might have an idea. Is or was there ever  
> more than one downflow radiator installed in Sprites or Midgets.
>
> My sons race car radiator is different from all other Bugeye  
> radiators that I currently have access to. The difference: On all  
> Bugeye radiators I am familiar with -- the distance from the top  
> rim of the fill opening to the seal surface where the cap makes its  
> seal, is approx. 1". That same distance on the race car radiator is  
> only approx. 3/4". A standard cap from Moss or VB (7 lb.)will not  
> work on this radiator and we have not been able to find a cap that  
> will work.
>
> Anyone have any ideas???

<Prev in Thread] Current Thread [Next in Thread>