Hi Dave,
If the rear shoes are correct and the Morris has it's original wheel
cylinders (I know Paul was not a proponent of upgrading the Morris to
later dual piston wheel cylinders, a la Spridget), the shoes will have
a notch in one end to accommodate the adjuster. The wheel cylinders
are held to the backplate with a small bolt (same as the Bugeye). The
E/C- clips are not for used on MM's. Later Spridget shoes look the
same , but without the notch, so check that before you start taking
things apart. I raise that question since you have the clips. Make
sure you use beehive springs on the shoes to backplate too.
I'd have to see the size of the washer, but it might be part of the
brake adjuster mechanism at the handbrake. Unlike Spridgets, the
handbrake uses two cables, one to each wheel, and the adjustment is by
a special bronze nuts at the handbrake lever.
Gerard
On Apr 30, 2011, at 4:52 PM, Dave KK7SS wrote:
> I have no rear brake action also the handbrake isn't doing its job :0
>
> I ffound that Paul A. had left a set of new shoes in a box on the
> back seat -- sort of a downer to think that he didn't have the time
> to fix them.
>
> Anyway, I opened the box and there are 4 new shoes *and* a plastic
> bag with 3 "C" circlips (looking like an old fashioned 'E')and one
> thick Bronze washer.
>
> I'm pretty sure I only need to change the shoes BUT what would those
> three 'C' circlips be for? And the thick Washer?
>
> Are they also for the rear brakes or was he planning on something
> else !
>
> --
> Dave G KK7SS
> DN06ig Richland, WA
>
> '59 Morris Minor 1000
> '65 Sprite - in process
> '76 Midget - shared with my #4 son.
> '06 Honda Civic Hybrid
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
> <*> To visit your group on the web, go to:
> http://groups.yahoo.com/group/morris_motors/
>
> <*> Your email settings:
> Individual Email | Traditional
>
> <*> To change settings online go to:
> http://groups.yahoo.com/group/morris_motors/join
> (Yahoo! ID required)
>
> <*> To change settings via email:
> morris_motors-digest at yahoogroups.com
> morris_motors-fullfeatured at yahoogroups.com
>
> <*> To unsubscribe from this group, send an email to:
> morris_motors-unsubscribe at yahoogroups.com
>
> <*> Your use of Yahoo! Groups is subject to:
> http://docs.yahoo.com/info/terms/
|