spridgets
[Top] [All Lists]

Re: [Spridgets] brakes*

To: Spridgets <spridgets@autox.team.net>
Subject: Re: [Spridgets] brakes*
From: David Lieb <72spridget@gmail.com>
Date: Sun, 22 May 2011 18:30:51 -0400
The Motion Pro Easy Bleed (like Dick has) is a very different animal
from the Gunson Eezi-Bleed. It works quite well for fluid flushing and
is quite adequate for one-man hydraulic bleeding. Never used mine
since I got the Gunson.

OTOH, it sounds like it did a fine job on Dick's brakes, but that
there is a seal problem in a cylinder or joint somewhere. At this
point a reasonably competent assistant would be valuable in
determining which wheels seem to have brakes when you pump the pedal.
I suspect a fitting is not quite tight and is allowing air into the
system.
David L
_______________________________________________

Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>