Don't tempt me, I don't have the money for it yet, and my current
gearbox is not liking me!
Right now, ~75mph in my 1500 with the 3.7 rear nets about 4,000rpm.
-=Chris
Chris King
http://home.comcast.net/~kvcbk/
<-----Original Message----->
From: Macy Larry [lmacy at mac.com]
Sent: 4/20/2011 7:47:12 AM
To: 72spridget at gmail.com
Cc: spridgets at autox.team.net
Subject: Re: [Spridgets] MG diff 3.70
Exactly why they need a 5 speed. Now I can cruise at 80.
Larry
--
Larry B. Macy, Ph.D.
One of these days, you'll look back on all this, and plow into a parked
car.
Sent from my Magical iPad
On Apr 20, 2011, at 5:44 AM, David Lieb <72spridget at gmail.com> wrote:
>> I think the example may be invalid.
>> I believe that the 1500cc (Spitfire) engine has more bottom end
torque than the 1275cc as such would probably be able to pull a taller
gear.
>
> No, it was the spec that was invalid. The taller gear was REQUIRED for
> the 1500 BECAUSE it didn't like high revs. Not knocking it; it was a
> Spridget engine, no matter its source and the low-end torque makes a
> car fun to drive on the street or in an autocross.
> David L
> _______________________________________________
>
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/spridgets/lmacy at mac.com
_______________________________________________
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/spridgets/cbking at alum.rpi.edu
.
|