The dipstick hole is just a hole drilled in the block. The doubled over
portion of the dipstick can be spread slightly to make it fit snuggly in the
block. There is a flat dimple (for a better description ??) that registers
how far the dipstick will go into the pan.
Jeff
----- Original Message -----
From: "brian" <daredelvis@gmail.com>
To: "Billy Zoom" <billyzoom@billyzoom.com>
Cc: "spridgets_autox.team.net" <spridgets@autox.team.net>
Sent: Monday, March 07, 2011 7:16 PM
Subject: Re: [Spridgets] 948cc dipstick question..
> Not on the 948. On the 948 it is all metal, no plastic around the hole.
> The
> dipstick itself like a long semiflat piece of metal doubled over on
> itself.
> Mine is about 14 inches long overall and about 5 1/2 inches long beyond
> the
> doubled part. It makes a noise very similar to banging on the bottom of
> the
> pan when you put it in.
>
> Brian
> On Mar 7, 2011 6:35 PM, "Billy Zoom" <billyzoom@billyzoom.com> wrote:
>> It's supposed to have a really stupid plastic tube to hold the dipstick.
>> That's what those chunks in your oil were.
>> _______________________________________________
>>
>> Donate: http://www.team.net/donate.html
>> Suggested annual donation $12.75
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/spridgets/daredelvis@gmail.com
> _______________________________________________
>
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/spridgets/homehandy@sbcglobal.net
_______________________________________________
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|