Yes, I have used a tumbler and cleaned bolts and nuts.B The only caveat in my
mind is that in critical usages, where if a bolt fails I die or something like
that, or if it fails massive damage would occur, such as in the case of failed
flywheel bolts, I would never use a cleaned bolt.B Only new stuff.B But for
non-critical connections, the cleaned bolts work well.
--David C.
THE SENILITY PRAYER : B Grant me the senility to forget the people
B I never liked anyway,
B The good fortune to run into the ones I do, and
B The eyesight to tell the difference.
----- Original Message -----
From: "Leo" <60bugeye at cebridge.net>
To: spridgets at autox.team.net
Sent: Thursday, February 17, 2011 11:07:56 AM
Subject: [Spridgets] parts cleaning
Has anyone ever used a tumbler to clean bolts? B Is there an issue that it
might "round over" the threads on the bolts and create an unsafe condition
in their usage? B Or is the elctro rust removal a better solution?
B
Leo
Suggested annual donation B $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/spridgets/dlancer7676 at comcast.net
|