Jim- I didn't see anyone supply exact dimensions for the front of the MKII, so
here goes. As Frank said, the rear pieces can be made from pieces of steel
about 4" long, 1/8" thick and 1" wide (they also fit the tonneau), about
October time frame, Frank (or someone) measured their front insert for the MKI
(after SN 5877) & MKII hood attachments, the dimensions are: 9/16" wide, 36
1/4" long and 1/16" thick with rounded ends.
Hope this helps,
Mark Haynes
HAN6L12977
HAN5L8016
____________________________________________________________
Mortgage Rates Hit 2.99%
If you owe under $729k you probably qualify for Gov't Refi Programs
http://thirdpartyoffers.netzero.net/TGL3231/4d222c7a252f59c7940st02duc
|