That'll work if you happen to have a fuel pressure gauge handy!
In a message dated 10/10/2010 12:20:31 GMT Daylight Time,
an5.sprite@gmail.com writes:
Linda,
You may find it easier to temporarily hook up a fuel pressure gauge right
before the first carb. You can then see if you are getting a full 3 to 4
lbs as the engine is cutting off. If not the problem is on the tank side.
If OK check to see if there is fuel in the float, if that is OK likely
electrical.
Good Luck
steve
_______________________________________________
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|