There should be a donut gasket in there.
Brad
On Fri, Jul 16, 2010 at 7:29 PM, Jess Power <jessmd1@comcast.net> wrote:
> I am putting an exhaust on my bugeye that has a 1275cc engine.It has a
> flange that seats but there is a gap between the pieces holding the pipe in
> the manifold.The gap is about 1/16 inch and the bolts are very tight.Also
> the fuel line was running right next to the exhaust.I separated the two.Is
> the muffler supposed to be angled upward at the back of the car?
> _______________________________________________
>
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/spridgets/tequila.brad@gmail.com
>
>
--
DON JULIO 1942
www.myspace.com/tequilabrad
_______________________________________________
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|