This should clear it up. :) My 5 speed had GL in it when I got it and had a
little problem with 1st to 2nd crunch. I replaced it with MT90 and it still
has the same problem. It also has the same problem from 3rd to 2nd and I
learned to double clutch it. I did figure out the if I shifted above 4000
it was good to go plus it adds to the smile factor.
Mark
Nashville
It's a little perplexing...
On one hand the original Datsum manual specifies 80W-90 or even the heavier
140wt for higher temperatures as Mike indicated
But we observe that the notchy shift goes away as the tranny wams up.
This seems to imply that a overall thinner gear oil would be prefered,
such as the multi-weight 75w90 that is suggested by Rivergate and others.
It's contradictory, I mean that I would have thought that a thicker gear
oil would
help the action of the sychros, but that appears not to be the case.
I'd like to believe that I could put in a API-GL4 lube and my notchy shift
would
magically disappear, but somehow I don't think that will happen.
Unless of course, someone else out there had a notchy shift and it went away
when they
swaped in Redline MT-90 or something similiar.
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/spridgets/mark@nashvilletn.org
---
avast! Antivirus: Inbound message clean.
Virus Database (VPS): 100323-1, 03/23/2010
Tested on: 3/23/2010 7:56:43 PM
avast! - copyright (c) 1988-2010 ALWIL Software.
http://www.avast.com
_______________________________________________
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|