I agree if you already are decent with Oxy welding, skip the MIG and go
right to TIG, its the same process. The only reason for MIG to really
exist is for speed, its much faster for large projects.
mike
On Mon, 2009-12-07 at 16:53 -0600, Sales at " Just Brits " wrote:
> I just sent this to Phil N. in response to his welder question.
> I think it's an EXCELLENT read for all [especially if in the market].
>
> -------- Original Message --------
>
> If you have good technique with an Oxy-Acyl rig , using TIG may be a piece
> of cake. A bit harder to use for most folks. Benefits, I'll Let Miller
> provide them.
>
> http://www.millerwelds.com/resources/tech_tips/TIG_tips/
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> You are subscribed as mikey@b2systems.com
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/spridgets
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|