Sure enough. You could easily incorporate this into an anti theft circuit.
Or even just a simple hidden switch to enable/disable the pump.
I'm thinking I might want to add an override switch in parallel with the
relay in the case where I might be troubleshooting ignition
problems or in the unlikely event that the unit should fail.
I should also mention that power (Vb) should come from the ignition switch
or an accessory relay that is turned on by the ignition switch.
Parts came tonight btw.
----- Original Message -----
From: "David Lieb" <72spridget@gmail.com>
> Easy enough to incorporate some "theft protection" in the design, no?
> David L
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|