There should be a hard point on the Titan timing cover that they drill and
tap for a vent.
Weslake-Monza 1330
In a message dated 21/07/2009 22:20:59 GMT Daylight Time,
grbyrns@ucdavis.edu writes:
John,
I've got a Titan timing belt w/unvented cover, so I draw from a vent
drilled into the fuel pump spot on the block. I also draw from the timing
cover and tee the hoses together just before the "flying saucer" gulp
valve. The valve goes into the intake between the throttle body and the
turbo. When all is good, the garage floor stays DRY.
Glen Byrns
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|