Martin
Make sure you have them installed on the proper side. They should each have
a cut out area to clear the tie rod. When we were doing the brakes on my
Midget during the NOSHIT we ran into the same problem. I had set up the a
parts box for each wheel and had mixed up the dust covers right for left.
Swapped them out and all was good.
Rich Ball
'76 Midget
Everett, Wa
----- Original Message -----
From: "Martin" <cooper6@swbell.net>
To: "'Spridgets'" <spridgets@autox.team.net>
Sent: Saturday, July 04, 2009 1:36 PM
Subject: [Spridgets] Front End Pad to disc brakes conversion question!!!!
> All,
>
> Have a technical question, I am changing out the Pad Brakes to Disc Brakes
> on the front end on my 59' BE. I got it all just about together, but it
> seems that the Tie Rod ends now bind against the disc dust cover - are
> there
> different tie rods ends on the disc brakes vs. the pad brakes and would it
> be ok to cut the dust cover so they do not bind them?
>
> Martin Cooper
>
>
>
>
>
> E-mail message checked by Spyware Doctor (6.0.1.441)
> Database version: 6.12750
> http://www.pctools.com/en/spyware-doctor-antivirus/
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> You are subscribed as richb@u.washington.edu
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/spridgets
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|