Doug,
I am in the process of doing the same thing. There are at least
three different A-arms, ones with the holes and mounts, ones with out
which you can drill but also need to add a reinforcing plate on the
inside of the A-arm and a A-arm that has a different reinforcing
design entirely an has no place to put the holes and reinforcing
plate (my case).
Bob Kitterer
1960 Austin Healey Sprite (Mk IV in disguise)
1966 Austin Healey Sprite Mk III (Trevor) - still in boxes
2000 Miata Special Edition
On Apr 28, 2009, at 5:04 PM, Doug Altman wrote:
> I just bought a used sway bar assembly for the Bugeye. The tapped
> holes on
> the underside of the ends of the frame extensions are there for the
> rubber
> mount straps but there are no holes in the front face of the
> wishbone/spring
> pans for mounting the link brackets. Evidently there were two
> types of
> wishbones - those with holes for the sway bar option and those
> without if the
> option was not part of the build plan. Is it SOP to drill the
> holes into the
> leading face of the wishbone/spring pans to fit the sway bar link
> brackets?
> Any particular location or just drill them when the links are
> positioned vertically?
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> You are subscribed as bkitterer@mac.com
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/spridgets
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|