spridgets
[Top] [All Lists]

Re: [Spridgets] Miss

To: <spridgets@autox.team.net>
Subject: Re: [Spridgets] Miss
From: <corvallis@peoplepc.com>
Date: Sun, 19 Apr 2009 10:40:57 -0700
Could be an air leak on the intake manifold ...somewhere. Something is loose
and getting loose-er. Carb bolts and movement is diminishing the gasket
there?
=============================================================
-----Original Message-----
From: spridgets-bounces@autox.team.net
[mailto:spridgets-bounces@autox.team.net] On Behalf Of Bill L
Sent: Sunday, April 19, 2009 10:23 AM
To: spridgets@autox.team.net
Subject: [Spridgets] Miss

Hello Spridgets,

        I've had a low speed miss. At first it happened only under
        2000 rpm, when putting around. Then it moved up to 2500, It
        happened when the engine was cold and would go away as it
        warmed up. Then it moved up to 3000 rpm. Today (spring arrived
        yesterday) I took it out and it moved up so it missed under
        4000 rpm, and even when mostly warmed up. Hmmmmmm?...

        I checked the plugs. They were dark brown, more than a tad
        rich, but not toooooo bad. One was worse than others so i
        changed the plug wire to that one. No difference. I have a
        Crane XR 700 so it's not points or condensor. (Boy does having
        one of those help trouble shoot. Ya always know it's NOT the
        problem)..

        Before today, if it started to stumble, (yes I have damper
        fluid) I could mash the go pedal and the miss would clear. But
        not today. when it was cold I could pull out the choke, engine
        speed would pick up, the miss would go away, the car would
        warm up and as it did, I would push in the choke and the miss
        would stay awawy (except below 2000 rpm, an occasional
        stumble.... .. but not today.....

        I've gotta get this cured.................





        I changed the dizzy cap and rotor. It seems MUCH better. It
        only stumbles a tad, once in a while driving below 1800 rpm..
        I ordered new ones from Advanced Distributor... ....

-- 
Best regards,
 Bill L.                          mailto:pythias@pacifier.com
 
 '66 Sprite MKIII HAN8L49403  "the red thing"
 
  Women DO come with instructions. Just ask them! 
_______________________________________________
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets

<Prev in Thread] Current Thread [Next in Thread>