Hi Dean,
Take it to a radiator shop to have the top removed for you. Then take out
the dent and smooth it up. Return it to the rad shop for reassembly and
painting.
They can also inspect the core for proper cleaning or rodding while the top
tank is off. 2 fixes at one time!! Hooray!
Later, Paul A
----- Original Message -----
From: "Dean Hedin" <dlh2001@comcast.net>
To: "Spridgets" <spridgets@autox.team.net>
Sent: Sunday, April 12, 2009 8:59 PM
Subject: Re: [Spridgets] Radiator dent removal
> Here is a picture of the radiator dent I need to repair.
>
http://i295.photobucket.com/albums/mm135/brokencase_photos/radiator%20dent/fixdent.jpg
>
> ----- Original Message -----
> From: "Dean Hedin" <dlh2001@comcast.net>
>
> >I have a slight dent in the top "tank" portion of my Bugeye radiator.
> > It is not very severe. Ill see if I can post a pic.
> >
> > In any case,what is the best approach to removing this dent?
> >
> > I remember seeing a gizmo somewhere that pulls dents with a little pad
that you hot melt
> > to the center of the dent and then had a jig that suctioned cupped to
the surface. You
> > then screwed the dent out. I thought that might work well. Has anyone
used one of these?
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> You are subscribed as pasgeirsson@worldnet.att.net
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/spridgets
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|
