Marty,
Clean out the "eye' really well, wire brush or Dremel and then I coat
everything with vaseline or a bit of oil (even been known to put the
bushing in the freezer overnight...don't know if it really helped or
not). I have a large 6" jawed vise and a socket that I used to press
the bushing in. Worked very well. DO NOT APPLY HEAT TO THE SPRING EYE.
Good luck,
Dave W.
>
>> All,
>>
>> I need to know the best way to insert (Press in) new bushings into the 1/4
>> Elliptic leaf springs
>>
>> Is there an easy way or should I just find a machine shop to get them to
>> press them in.
>>
>> Marty Cooper
>> 59' Bugeye
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|