Sorry all, I subscribe to the digest, and neglected to change the
subject line....
I use Kroil penetrating oil - have most of a gallon jug that has
lasted for a few years - apply with brush or old windex spray bottle.
That and patience does the trick 80% plus of the time for me.
Now for more coffee...
-m
On Apr 09, 2009, at 6:57 PM, Andrew Payne wrote:
> I have been removing parts, with much frustration. Several parts
> have come
> off only with the use of my 24 tooth per inch "screw driver". WD-40
> is not
> enough. Any suggestions on techniques to free rusty screws and
> bolts? I
> have heard to use a blow torch, but was afraid to use one on lights
> and
> such. Please help, I am tired of the hacksaw.
>
> Drew
> ________
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|