Why not? It's easier than a Spridget gearbox. You don't have to pull the
motor, and you have access both top and bottom. I had my Tercel box out
in about 30 minutes. :)
-=Chris
Chris King
http://home.comcast.net/~kvcbk/
<-----Original Message----->
From: David Lieb [dbl@chicagolandmgclub.com]
Sent: 3/12/2009 6:47:14 AM
To: thcollin@mtu.edu;spridgets@autox.team.net
Subject: Re: [Spridgets] NMC - PT Cruiser No Go
>>> What's the verdict??? Do you know yet?
The transmission guy assures me that, since it slips effortlessly into
every
gear with the engine running and my foot off the clutch, it pretty much
has
to be the center ripped out of the clutch or the input shaft is broken
(it
musta talked to my Spridgets too much). I won't know for sure until it
is
out and open. Somehow I think I am actually going to pay someone else to
do
this one... I just can't get excited about pulling an FWD trans...
David Lieb
_______________________________________________
Support Team.Net http://www.team.net/donate.html
You are subscribed as cbking@alum.rpi.edu
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|