Mark wrote:
> FTF, While taking the rear of the Bugeye apart I found that the rear hub is
> hitting the brake cylinder. I have later backing plates and dual piston
> wheel cylinders. Do I just need to grind off the corner of the hub and
> wheel stud? Is there something unique with the Bugeye rear axel when used
> with late rear brakes? I have a few hubs and they all do the same thing.
>
>
>
The hub will scrape the rubber boot but it should not hit any metal on
the wheel cylinder.
I have converted a few Bugeyes to later back plates.
You will have to grind about a 1/16 off the back of the brake drum, that
will rub.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|