I will go with a Petronics unit and have found a good used OPUC module as a
spare along with a resistor. The original distributor base with dummy OPUS
has the proper mechanical advance and I can go with or with out vacume for
even more in the upper RPMs.
Thanks for all the advice.
Tracy Drummond Gang Warily !
President AHCUSA www.healey.org
-----Original Message-----
From: David Riker [mailto:davriker@nwi.net]
Sent: Tuesday, December 02, 2008 7:07 AM
To: Tracy Drummond; spridgets@autox.team.net
Subject: Re: [Spridgets] Midget 1500 distributor options
Any A-series distributor will fit and work. The 1500 engine is a long
stroke design, and can handle quite a bit of total advance curve. Someone
else can point you to an internet site that has the specs on all the
different stock advance curves. I would find one from a '68 1275, and then
put a petronics unit in it.
Dave R.
----- Original Message -----
From: "Tracy Drummond" <bighealey@charter.net>
To: <spridgets@autox.team.net>
Sent: Monday, December 01, 2008 5:51 AM
Subject: [Spridgets] Midget 1500 distributor options
> What are my options for a 76 Midget distributor?
>
>
>
> My OPUS amplifier is shot and I am looking at my options.
>
>
>
> Points are fine and it seems a 45D will drop right in although it would
> probably need recurved.
>
>
>
> Comments, recommendations?
>
>
>
> Tracy Drummond Gang Warily !
>
> President AHCUSA www.healey.org
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> You are subscribed as davriker@nwi.net
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/spridgets
----------------------------------------------------------------------------
----
No virus found in this incoming message.
Checked by AVG - http://www.avg.com
Version: 8.0.176 / Virus Database: 270.9.12/1821 - Release Date: 11/30/2008
5:53 PM
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|