Bill, David and others
You're right! I finally got out to check out my un-modified flywheel. The
original 1275 pressure plate stands on a raised face the same diameter as
the plate that stands proud of the outer thickness by about 1/16". For the
larger Datsun plate, the raised portion must be machined away so the plate
can mount to a flat surface. That will change the weighting enough to
suggest balancing. So I guess its off to the local machine shop.
Glen
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|