spridgets
[Top] [All Lists]

Re: [Spridgets] HS2 Float Lid Question

To: David Ambrose <stargazer1@cox.net>
Subject: Re: [Spridgets] HS2 Float Lid Question
From: Lester <oldsaabguy@comcast.net>
Date: Wed, 16 Jan 2008 23:20:00 -0600
Stuck float, dirty seat, bad needle??  Not closing allowing fuel out  
the overflow..

Lester

..  but I'm not the guy..


On Jan 16, 2008, at 10:57 PM, David Ambrose wrote:

> Greetings O Learned Ones:
>
> My son and I just mounted some newly rebuilt carbs on his desmogged  
> '70
> midget. We turned on the key, and have gas coming out the "spare" hose
> connection on the rear carb. I don't remember us having anything on  
> that
> connection previously so I'm both puzzled and concerned by this sudden
> production of liquid petrol. Did we get the carb lids swapped? The
> emission control diagram seems to indicate that is normally a vent of
> some sort that runs to the carbon cannister.
>
> Thanks,
> Dave Ambrose
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets

<Prev in Thread] Current Thread [Next in Thread>