Lester,
I've bought piston sets, new and used, many times on Ebay. I'd say the
supply is drying up a bit, as I find far fewer on a weekly basis than I used
to.
I might have a used set for you.
Venolia will make up a set of new forged pistons for around $550 if I
remember right. They can make them any size you need.
WST
-----Original Message-----
From: spridgets-bounces+wsthompson=thicko.com@autox.team.net
[mailto:spridgets-bounces+wsthompson=thicko.com@autox.team.net] On Behalf Of
Ewing Lester
Sent: Monday, January 14, 2008 12:52 PM
To: Spridgets net; Bugeye
Subject: [Spridgets] 65mm piston ??
Afternoon all (West coast excluded)..
I have called Jahn's and they no longer make auto pistons. The
pistons for the engine-in-a-box are 65 mm as are the bores in the
block. This would be 80 thou over from my calculations or put
another way:
Stock 62.9 mm 2.477 iin
Mine 65.0 mm 2.559 in.
so, where can I get a set that is 65 mm? or maybe just one other
Jahn 273 piston?
Thanks all,
Lester
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|