A lot of people have drill bits of various sizes and if the shank is a
reasonable fit, it is a thickish grease and there is a large piece of wood
between the point of the drill bit and hammer to protect the drill it does
work. As the bush is a new one it may be worth trying to preserve it.
GRD
(Is it any wonder my larger bits are bent? ;-) )
>> I just make a mess with the grease, I've never been
>> able to make it work. I just use a hand drill and
>> carefully drill it out, it usually spins out easily
>> once a little material is gone.
_______________________________________________
Edit your replies
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|