David & List,
Yes I am getting an electrician because I also bought a new MIG and will
need a new dedicated line.
Thanks Lin
On 8/15/07, David Lieb <dbl@chicagolandmgclub.com> wrote:
>
> >> You can uprate the breaker often times and have no ill effect. Often a
> >> much heavier guage of wire was used in the first place. Analyze the
> wire
> >> ga - OK throw the breaker first.
>
> Derf's point was that the breaker was tripping when the motor tried to
> start, not under continued use. The extra amperage used at start is of
> short
> duration and does not necessarily represent a fire hazard. I agree that
> the
> ideal solution is to run a brand new dedicated 20A circuit for this
> device,
> but that is probably overkill. OTOH, if you put off all your projects
> until
> you get around to re-wiring the garage... On the third hand, since Lin has
> or is getting a MIG, it is probably a great time to re-wire properly.
> David Lieb
> _______________________________________________
> grunthaner@gmail.com
>
> Edit your replies
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/spridgets
_______________________________________________
Edit your replies
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|