I used a combination of 1/4" rubber lined P-clips from the hardware store
with sheet metal screws below the box section areas. The seat strengthening
rails have holes in the sides and I used tie wraps for that area.
Duncan
-----Original Message-----
From: dmg@bossig.com [mailto:dmg@bossig.com]
Sent: Wednesday, July 04, 2007 6:23 PM
To: spridgets@autox.team.net
Subject: [Spridgets] fuel line clips...
I need the clips that keep the fuel line held to the body from the back up
to
the engine compartment.
My fuel line is not secured anywhere and is hanging down. Bad News!
They do not appear to be in the Moss catalogue.
VB shows a clip that appears to need a hole in the underbody.
Before I order some of these, is there a clip from someone like NAPA that
would do the job?? Or has someone found a better way to do this??
I'm not interested in originality but in safety...
TIA
Dave G.
_______________________________________________
duncan@pondhop.com
Edit your replies
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
_______________________________________________
Edit your replies
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|