I will make a third vote for the motor mounts. Try jacking up under the oil
pan (with a suitable board to distribute the load) and see what moves where.
I am assuming that the frame rails are not bent?
You might want to consider going to an electric fan. If you do, you will
want to acquire a shroud from a 1500 Midget and look for a very slim 10" or
11" fan. Room is at a premium in there. The upper radiator hose will reach
fine, but the lower one will not; I used a spare upper hose and cut it to
fit, but it really needs a bend in it that is tighter than 90*, so I am
still meaning to stop by a parts store and look for a better hose.
David Lieb
|